Ask Your Question

Brahmaputra - Deployment Error: Method granular_deploy. Deployment failed on nodes 11. Inspect Astute logs for the details

asked 2016-03-09 18:24:33 -0700

mshanmugam gravatar image

Trying to install OPNFV Brahmaputra from here: Fuel Installation Guide, ISO.

I was able to follow all the procedures, an am at the Deploy changes step.

This is the error I am getting: Error Deployment has failed. Method granular_deploy. Deployment failed on nodes 11. Inspect Astute logs for the details

I am not able to attach the Astute log and RPC consumer log with errors.

What other data can I get from the Fuel Server?

edit retag flag offensive close merge delete

1 answer

Sort by ยป oldest newest most voted

answered 2016-03-10 04:27:14 -0700

lmcdasm gravatar image


Can you provide some more information please? Are you doing HA or SA (three or one controller)? Can you confirm that your Verify Networks passed prior to deployment Can you confirm that your NTP server is reachable from all nodes (and that the NTP is NOT your fuel VM). If you are doing HA deployment, the GW IP of the PUBLIC network MUST be reachable (pingable) for ha-proxy to com eup.

i suspect that you have an issue with synchronization, but wihtout more information about your topology, what you are deploying (what options) and on what hardware its hard to provide more accurate info apart from the general tips above.

If you can tell me more, I can tell you more :)


edit flag offensive delete link more


non-HA - 1 Controller. HP Proliant DL360 G7, RAM=48GB, Disks=3,2.2TB Interfaces=2x1GB -> CONTROLLER+MONG+BASE-OS+OPENDAYLIGHT. 2 Computes - Dell PowerEdge R720d, RAM=256GB, Disks=2, 27.6TB, Interfaces=1x1Gbps, 2x10Gbps - COMPUTE+CEPH-OSD Check Network Configuration - passed. NTP reached from Fuel S

mshanmugam ( 2016-03-10 07:02:07 -0700 )edit

NTP not Fuel Server. Fuel Server is not a VM. It is HPO Proliant DL360 G7 Server Verified that NTP Servers 0,1, are all ping'able from all 4 nodes, including Fuel Master. Additionally: Sahara, Murano, Ceilometer OS Services. Can get rid if these... KVM as HV Reset Ceph Ob. Rep->2

mshanmugam ( 2016-03-10 07:14:42 -0700 )edit

Under Networks/Other: Host OS NTP Servers: NTP server list is set to,, Did several: ntpstat, ntpq -pn, timedatectl status commands (on all 4 nodes) and all seem to be ok wrt. NTP

mshanmugam ( 2016-03-10 07:26:34 -0700 )edit

Current status - Controller node: ERROR, Computes - Ubuntu is installed.

mshanmugam ( 2016-03-10 07:27:28 -0700 )edit

Any update based on the information I have provided? Is there anything else you want me to check? Of course I am unable to attach the Astute and RPC consumer log files with errors - I don't have enough points :-) ?

mshanmugam ( 2016-03-11 05:57:41 -0700 )edit

Your Answer

Please start posting anonymously - your entry will be published after you log in or create a new account.

Add Answer

[hide preview]

Question Tools

1 follower


Asked: 2016-03-09 18:24:33 -0700

Seen: 506 times

Last updated: Mar 10 '16